Sidebar
Grid View:
KING RACING Con Rod Bearing Set VAG 1.8T/2.0TFSI EA113 (Without Notch) - XP Series
69.62€
Product descriptionSuccessful race engine builders are constantly pushing the limits of load capacity to new levels. Race bearings today inevitably need to match these demands with more competitive be..
Kolbenschmidt Pistons Set 81.51mm KS 1.9/2.0TDI
550.00€
High quality KS (Kolbenschmidt) pistons measuring 81.51mm used to increase displacement in 1.9 TDI engines (OEM 79.51mm)Specifications:Reference 40408620 / 40409620Cylinder diameter [mm]: 81.51Compres..
MAHLE Performance Fuel Filter 6.6 Bar for 2.0TFSI EA113
34.99€
Replacing your car's fuel filter will increase fuel flow compared to your used and dirty filter.This improved fuel filter revision is at 6.6 Bar and is superior to all previous ones.We advise to chang..
MAHLE Pistons Set 81.51mm 1.9/2.0TDI 8V PD
550.00€
High quality MAHLE pistons measuring 81.51mm used to increase displacement in 1.9 TDI 8V PD engines (OEM 79.51mm)Specifications:Reference 0280602 / 0280702Cylinder diameter [mm]: 81.51Compression heig..
MANF RACING 75º Coolant Thermostat for 1.9 8V TDI Engines
24.99€
This cooler 75°C Thermostat is designed to stop the overheating of higher power vehicles.When the Thermostat is stuck open the vehicle will take a while to get up to temperature.Another symptom when s..
MANF RACING Aluminium Intercooler MAP Sensor Adapter Flange 12mm VAG TDI TSI TFSI
29.99€
Specifications:High quality CNC-machined T6061 aluminiumThickness: 12mmSpaces between holes: 36 mmPrecision: 0.01mmThread 2 x M6Each
flange has been machined to sit perfectly flush on the outer diam..
MANF RACING Aluminium Intercooler MAP Sensor Adapter Flange 18mm VAG TDI TSI TFSI
29.99€
Specifications:High quality CNC-machined T6061 aluminiumThickness: 18mmSpaces between holes: 36 mmPrecision: 0.01mmThread 2 x M6Each
flange has been machined to sit perfectly flush on the outer diam..
MANF RACING BOSCH EU5 1200CC DIRECT FUEL INJECTOR UPGRADE FOR S55 BMW M3 F80 / M4 F82 / M2 COMPETITION F87 & BMW M2 N55
940.29€
The BMW M3 and M4 S55 (inc. M2 Competition) motor is doing impressive things on the factory fuel system. However, the direct injection system is limited by poor flowing injectors. This kit will allow ..
MANF RACING CAST ALUMINIUM WATER PUMP UPGRADE FOR 2.0 TSI EA888 GEN 1 VW GOLF 6 GTI / SCIROCCO
179.99€
Cast Aluminium Water Pump Kit for 2.0TSI EA888 GEN 1No more plastic water pumps, no more water pump leaks. Replace your water pump once and for all. That factory plastic pump is no match for our cast ..
MANF RACING Complete Pistons Set including ZRP Rods 81.51mm KS 1.9/2.0TDI PD
1,134.85€
KS Piston Kit (Kolbenschmidt) measuring 81.51mm of high quality used to increase the displacement of 1.9 TDI engines (OEM 79.51mm) together with forged I-shaped connecting rods from the ZRP brand for ..
MANF RACING Complete Pistons Set MAHLE 81.51mm including ZRP Rods 1.9/2.0TDI PD 8V
1,134.85€
MAHLE Piston Kit measuring 81.51mm of high quality used to increase the displacement of 1.9 TDI engines (OEM 79.51mm) together with forged I-shaped connecting rods from the ZRP brand for a setup capab..
MANF RACING DECAT DOWNPIPE AUDI A3 8P / TT 8J / OCTAVIA 1Z / LEON 1P / GOLF 5 GTI / GOLF 6 GTI 2.0TFSI EA113 / 2.0TSI EA888.1
249.99€
MANF RACING downpipe with decat made from T304 stainless steel,
mandrel bent and TIG welded 3" / 76mm pipework. Fits as direct bolt on
from the turbo to the catback on 2WD 2.0 TFSI EA113 and EA888..
MANF RACING Decat Downpipe for A45 / CLA 45 AMG
499.00€
MANF RACING Decated downpipe made from T304 SS, mandrel bent and TIG welded, stepped 89mm(3.5'') to 76mm(3'') diameter. Direct bolt on from the turbo to the OEM catback w..
MANF RACING DECAT DOWNPIPE VW Golf 7 GTE 1.4 Plug-In Hybrid
650.00€
MANF RACING downpipe with decat made from T304 stainless steel, mandrel bent and TIG welded 2.5" / 63.5mm pipework. Fits as direct bolt on from the turbo to the catback on 1.4TSI EA211 VW Golf 7 GTE 1..
MANF RACING DECAT DOWNPIPES BMW M2 COMPETITION / BMW M3 F80 / BMW M4 F8X
450.00€
The MANF RACING decat downpipes made from mandrel bent and TIG hand welded T304 stainless steel are a direct bolt on upgrade for the great S55 engines found in the M3 / M4 and M2C. With a high manufac..













